What We Do

Services

Here's the full list of deck work we quote, from a brand new build to a repair on something someone else built.

Home › Services

Everything we take on

Every job below is one we do ourselves across Binghamton.

Deck Installation

We set footings below the 42-inch frost line used in this part of New York, so the deck doesn't heave when the ground freezes. Joists go in at 16 inches on center, and the ledger board gets through-bolted and flashed to keep water from working its way into your rim joist.

Deck Repair

Soft spots in the decking usually mean the board underneath is holding water, not that the whole frame is bad. We replace what's rotted, sister cracked joists, and tighten up railings before they turn into a liability.

Deck Staining & Sealing

We pressure wash and sand first, because stain doesn't hold on top of old mildew and graying wood. Depending on sun exposure and foot traffic, most decks around here need a fresh coat every two to three years to keep winter moisture out of the grain.

Custom Deck Design

Some decks need to wrap around a hot tub, step down to a lower patio, or tuck a bench into the railing line. We'll draw it out, account for New York's snow load requirements, and build to match the roofline of your house instead of bolting on something generic.

Composite Decking Installation

Composite boards like Trex or TimberTech don't need staining and won't splinter underfoot. We install them with hidden fastener clips for a clean surface, and leave the gap manufacturers call for so the boards can expand in summer heat without buckling.

Deck Railing Installation & Repair

Code calls for balusters spaced so a 4-inch sphere can't pass through, and we build to that whether it's wood, aluminum, or cable rail. Loose posts are almost always a sign the concrete footing underneath has shifted, and that's what we actually fix.

Deck Resurfacing & Board Replacement

If the frame underneath is still solid, you don't need a whole new deck. We pull the old decking, check every joist while it's exposed, and lay new boards with the right gap spacing so water sheds instead of pooling.

Deck Demolition & Removal

Old decks come down board by board, with nails and screws pulled instead of left in the lumber pile. We haul everything off, including the ledger board if it's getting replaced, so the site is clear for whatever comes next.

Screened-In Porch & Deck Combos

A lot of homeowners want part of the deck open and part of it screened in off the bugs. We tie the roof framing into the house correctly and build the screen panels separate from the open deck rail, so each section does its job.

Deck Footing & Structural Repair

Concrete footings crack or heave, posts rot where they meet the ground, and joists sag under years of snow load. We dig out and replace footings below frost depth, swap rotted posts, and sister joists that are still structurally sound but starting to bow.

How It Works

Four steps, and no surprises in any of them.

01

We come and look

You tell us what you want doing, we look at what is actually there, and we ask the awkward questions early.

02

You get a price

In writing, itemised, free. If something might add cost later we flag it now rather than at the end.

03

We do the work

Same crew throughout. We cover your floors, keep the dust down and tidy up before we leave each day.

04

We walk it with you

You point out anything you are not happy with and we fix it before the invoice, not after.

Where We Work

All of this, across Binghamton, NY

We quote deck work throughout this part of New York, not just inside Binghamton city limits.

Binghamton, NY
Ithaca, NY
Elmira, NY
Vestal, NY
Cortland, NY
Johnson City, NY
Oneonta, NY
Endicott, NY
Endwell, NY
Norwich, NY
Owego, NY
Common Questions

Things worth asking

Questions that come up once a deck project is actually underway.

Do I need a permit to build a deck?
Most towns in New York require a building permit for a deck attached to the house or more than 30 inches off the ground, and the local building department will inspect footings and framing before it's closed in. A deck builder familiar with the area usually handles the permit application as part of the project.
How long does it take to build a deck?
A standard ground-level deck typically takes one to two weeks from digging footings to final fastening, weather allowing. A multi-level deck with stairs, built-in seating, or a roof structure can take three to five weeks depending on size and material.
Can you build within a specific budget?
A deck builder can usually adjust the design, decking material, and railing style to fit a set budget rather than quoting one fixed plan. Pressure-treated lumber keeps costs lowest, while composite decking and aluminum or cable railing push the price up.
Do you offer a warranty on deck work?
Most deck builders back their labor with a workmanship warranty, typically one to five years, separate from the manufacturer's warranty on composite decking or hardware. It's worth asking exactly what's covered, since a warranty on framing is different from one on stain or sealant.
Will I be dealing with the owner or a project manager during the build?
On most residential deck jobs, the homeowner deals directly with the person running the crew rather than a separate office contact. That's usually the fastest way to get a question answered mid-project.
What decking materials do you work with?
Common decking options include pressure-treated pine, cedar, and composite brands like Trex or TimberTech, each with different maintenance needs. Pressure-treated costs least but requires restaining every few years, cedar weathers naturally but can splinter, and composite costs more upfront but requires no staining.
Can I still use my yard while the deck is being built?
Most of the yard stays usable during a deck build, though the immediate work area around the footings and framing needs to stay clear for safety and material staging. Pets and kids are usually fine kept out of that zone until the crew leaves for the day.
What should I do to prepare the site before work starts?
Clearing furniture, grills, and potted plants off the old deck or the build area saves time on day one. It also helps to point out any buried sprinkler lines, dog fencing, or utility markers near the dig site before footings go in.
What happens if you find rot or damage once the old decking comes up?
Hidden rot in joists or the ledger board is common once old decking is pulled, especially around fastener holes and where the deck meets the house. A deck builder should flag it immediately and price the additional repair before proceeding, rather than covering it back up.
How do I maintain a new deck once it's finished?
Wood decking requires a fresh coat of stain or sealant every two to three years depending on sun and weather exposure, plus an annual check for loose fasteners and soft boards. Composite decking just requires regular washing to clear debris from between the boards, since trapped leaves and dirt can hold moisture against the structure.

Not sure what you need?

Describe the problem and we will tell you what it probably is. No obligation.

Call (607) 600-6702